REFINE YOUR SELECTION

Business user account

Log in!

Products on page:
R915 4-wire card reader; Tri-colour LED; IP65, 14.4 x 15.2 x 2.5 cm, -35 to 65 °C. Colours: white, black.
NEW-ACC Software guarding + access. EVO192/EVOHD. On-line monitoring and management of the system, status and faults of zones and watch areas.
R910 4-wire card reader; Tri-colour LED; Reads cards up to 10cm away. -35 to 65 °C; 5.5 x 15 x 2.5 cm
ACM12 Access module for EVO card reader (1 door, bi-directional with paradox readers R910/R915, also supports other card readers with Wiegant 26bit protocol; Access by card or code (R915); Alarming, unlocking by card or code; Monitorable 1.5A power supply; 16 Vac 20VA.
The PRT3 allows the Paradox alarm system to be interfaced (e.g. KNX) with home automation. Compatible with EVO series or DGP-848 (4.11 or higher). Transmits information between the central device and the home automation using ASCII or C-Bus protocol.
BUS2SER KNX interface module 16 virtual inputs, 30 virtual PGM outputs, USB port for connection to PC, interface between EVO central unit and third system, automatic/manual event printing, configurable for multiple control rooms, stores 2048 events in memory.
PS-817 1.75A Power block, input voltage 16.5VAC 40VA
HUB2 HUB and BUS isolator; Splits the data line into two independent outputs; Use when the data line between expansion modules exceeds 600m (depending on cable diameter); The data line can be routed up to 900m from either output.
The PS45 is a 75W (4A) monitorable power supply for Paradox control panels, also available without Paradox control panel. The output is 13.8V/4A and allows the use of batteries with a total capacity of up to 29 Ah (7 Ah and up to 22Ah).
PS25 2.5A Power supply, monitorable, selective battery charging current (300mA/1200mA), for EVO/Spectra/Magellan. -20 to 50° C. GRADE 2, Class II

Business user account

Log in!